Acrylic latex based Additive cum Bonding Agent suitable for Waterproofing of water tanks, roofs, balconies, terraces, wet areas, reservoir, swimming pools and fountains. Bonding old to new concrete. Additive for repair mortar.


  • Good water proofing property
  • No degradation on long term exposure
  • Excellent bonding properties
  • Enhances strength & durability of Repair Mortar
  • Suitable for external and internal repairs

Instruction For Use:

The surface must be thoroughly cleaned to remove all dust & debris. Surface should be free from oil, wax, or any other contaminations. Ensure the substrate is sound before application. Wet the surface before coating to achieve SSD condition.

  • As Waterproofing Coating: Mix cement and Mcrete 776 in the ratio of 2:1 pbw to get uniform and consistent slurry by using low speed stirrer. Apply material by stiff brush. Minimum two coats to be applied in the interval of 5-6 hours. Mix frequently to avoid setting during application. Cure for 3 days. Coverage : 1 Sqm/ Kg Mix in 2 Coats
  • As Polymer Modified Mortar: Cement – 50 Kgs + Sand Zone II – 125 Kgs + Mcrete 776 – 10 Ltrs + Water to get desired consistency
  • As Bonding Agent: Apply directly or mix cement & Mcrete 776 in the ratio of 2:1 pbw to get uniform & lump free, consistent slurry. Apply on the surface as Bond Coat.

Performance Properties:

Appearance : White Emulsion Liquid 
PolymerType : Acrylic Co-Polymer
Brook field Viscosity LVF :< 150 cps
Density : 1.02
Solid Content : 47± 1 %
pH : 8-10
Film properties : Clear and soft
Pack Size : 1/5/20 kgs
Shelf Life : 12 Months


Enquire Now